Factory directly supply Diy Single Axis Solar Tracker - Tilted Single Axis Solar Tracking System – Zhaori
Factory directly supply Diy Single Axis Solar Tracker - Tilted Single Axis Solar Tracking System – Zhaori Detail:
Product Introduction
ZRT tilted single axis solar tracking system has one tilted axis (10°– 30° tilted) tracking the azimuth angle of the sun. It is mainly suitable for medium and high latitude regions. Each set mounting 10 – 20 pieces of solar panels, increase your power generation by about 15% – 25%
We use three point supports for the structure to make it more stable and has better wind resistance performance, no shaking clearance on driving system and rotation parts. The rotation parts using UPE material solar bearing with 4.5 million molecular weight, good wear resistance and aging resistance, self-lubricating, 25 years without maintenance.
No professional maintenance personnel are required, in case of equipment problems, the spare parts can be replaced directly in very short time on site.
We can provide two driving options and flexibly adjust the solution for different projects. IP65 protection grade for electronic parts, double layer protection for core components, it can be applied in desert projects and water projects.
The structure using hot-dipped galvanized steel or new type galvanized aluminum magnesium with high strength and good corrosion resistance, it can be installed in coastal areas.
More than 6000 sets of ZRT series tiled single axis solar tracker have been installed and used in public utilities projects, industrial and commercial projects, solar water pump projects and household projects all over the world.
Product Parameters
| Control mode |
Time + GPS |
| System type |
Independent drive / 2-3 rows linked |
| Average tracking accuracy |
0.1°- 2.0°(adjustable) |
| Gear motor |
24V/1.5A |
| Output torque |
5000 N·M |
| Tracking power consumption |
0.01kwh/day |
| Azimuth angle tracking range |
±50° |
| Elevation tilted angle |
10° – 30° |
| Max. wind resistance in horizontal |
40 m/s |
| Max. wind resistance in operation |
24 m/s |
| Material |
Hot-dipped galvanized≥65μm |
| System warranty |
3 years |
| Working temperature |
-40℃ — +75℃ |
| Weight per set |
160KGS – 350KGS |
| Total power per set |
4kW – 20kW |
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Factory directly supply Diy Single Axis Solar Tracker - Tilted Single Axis Solar Tracking System – Zhaori , The product will supply to all over the world, such as: Honduras, Hyderabad, Victoria, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
By Christine from Mumbai - 2017.06.19 13:51
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Dee Lopez from Uzbekistan - 2017.01.28 19:59
Products categories
-
Factory Promotional Solar Pv Tracker - Adjusta...
-
2022 High quality Solar Axis Tracker - Flat Si...
-
2022 High quality Two Axis Solar Tracking Syste...
-
Good User Reputation for Self Tracking Solar Pa...
-
Factory Outlets Solar Tracking Device - Adjust...
-
Well-designed Large Solar Tracker - Flat Singl...