Dual-Axis Solar Trackers & Rooftop Mounting for Solar EPC Companies | 1.0MW JiNeng New Energy Case

Hybrid solar system with dual-axis trackers on a green belt and fixed roof mounting, built by a solar EPC company

Dual-Axis Solar Trackers & Rooftop Mounting for Solar EPC Companies: A 1.0MW Case

For an EPC company, a demonstration project on its own site is more than a power station — it is a living showcase to prove quality to future clients. Every panel, every structure and every tracker on display must be a benchmark of reliability and performance.

That is why Heilongjiang  New Energy Company chose Zhaori (Shandong Zhaori New Energy Technology Co., Ltd.) to supply the dual-axis solar trackers and roof mounting systems for its 1.0MW flagship demonstration project, built on the company's own green belt and building roofs.

Flagship demonstration project using Zhaori dual-axis solar trackers at an EPC company's own facility

Why an EPC Builds a Demonstration Project on Its Own Site

A demonstration project is an EPC's most persuasive sales tool. Before clients commit, they want to see a real, working installation: how the structure handles wind and snow, how precisely it tracks the sun, how cleanly it was installed. A flagship project on the EPC's own premises gives that proof — which is why the supplier must be the best available.

Why They Chose Zhaori?

The New Energy Company evaluated suppliers on exactly the qualities a showcase demands. Zhaori was selected for a set of distinct advantages:

A dedicated solar tracking manufacturer — Years of export experience focused on trackers and mounting systems, not a sideline product.

Higher yield, proven by design — Dual-axis tracking lifts generation by about 25–30% over fixed mounting, so the showcase delivers visibly more power.

Precision with near-zero operating cost — Time + GPS astronomical control gives tracking accuracy of 0.1°–2° while drawing under 0.02 kWh per set per day.

Engineered reliability for harsh climates — Hot-dip galvanized structures, wind and snow load calculations, and full structural reports, built for northern winters.

One accountable supplier — Tracking mounts, fixed rooftop mounting and ground structures from a single source, with design support, installation guidance and certifications.

For a flagship project that must represent the EPC's own standards, these qualities were not optional — they were the reason for the choice.

Precise, low-power dual-axis tracker by Zhaori on display in a flagship EPC demonstration project

The Demonstration Project: One Supplier, Two Mounting Systems

Zhaori supplied both mounting systems that make the showcase complete:

Dual-Axis Solar Trackers on the Green Belt

Dual-axis solar trackers follow the sun's full path in azimuth and tilt, capturing significantly more energy than a fixed array. Structures are hot-dip galvanized on reinforced concrete foundations, engineered for local wind and snow loads with foundations clear of underground cables and piping.

Fixed-Tilt Rooftop Mounting on the Buildings

For the roofs, fixed-tilt roof mounting systems — non-penetrating where possible, ballasted or attached without damaging waterproofing, with per-roof structural checks — add low-cost, low-maintenance base-load generation.

Site Capacity Mounting
Green belt 0.6MW 24 dual-axis solar trackers
Building roofs 0.4MW Fixed-tilt roof mounting
Total 1.0MW Hybrid (tracking + fixed)

What the Showcase Delivers

Annual generation: ≈1.16 million kWh, almost fully self-consumed on site

Annual electricity savings: ≈600,000 CNY under commercial tariffs

Generation uplift on the tracking portion: ≈27% vs. fixed mounting

Investment: rooftop fixed mounting is low-cost; tracking adds only ~10%, while shortening payback by about one year

Beyond the numbers, the project gives JiNeng New Energy a working reference to show every future client — proof that premium engineering pays off.

Build Your Flagship Project with Zhaori

Whether you are an EPC building a demonstration site or a developer equipping a full plant, Zhaori designs and supplies dual-axis solar trackers, fixed-tilt roof mounting systems and ground PV structures — engineered for quality, backed by structural calculations and delivered as one accountable package.